Suzhou Ukada Energy Saving Technology Co., Ltd

English

中文

40 years focus on spiral plate heat exchanger R & D and production

Hotline
+86 15995409705

Water source heat pump industry

When using heat pump system, for corrosive water source, it is necessary to add corrosive stainless steel heat exchanger or titanium plate heat exchanger in the system, otherwise, if the heat pump system has scaling corrosion, it will greatly enhance the cleaning and maintenance of the heat pump system.

Field of application

Industrial water and waste disposal

Most industrial processes will produce waste logistics that need to be handled or disposed of, and many companies are facing strict requirements. Therefore, the ability to dispose of waste and reduce disposal volume is the key to maintaining license operation and expanding production capacity. Ukada provides a variety of solutions for on-site water and waste treatment and recovery of water, heat and even products in the process.

Why should on-site water and waste treatment be carried out?

Recycle valuable resources from major processes Reduce water consumption to a minimum by reusing treated wastewater Waste reduction treatment Cost-effective production Reduce Environmental Footprint

Product Display

Stainless steel

Carbon steel

Bubble model

Fixed distance column

MORE >

The road of zero emission

Ukada helps reduce the impact of water and waste logistics on the environment by maximizing the use of water, converting waste into value and minimizing energy consumption and waste.

Service

Suzhou ukada Energy Saving Technology Co., Ltd. has specialized spiral plate heat exchanger experts, who know your industry very well. Whenever and wherever, we will provide you with parts and professional knowledge to support you. The eukada service portfolio covers all requirements throughout the entire life cycle of the device, from startup, maintenance, support and improvement to monitoring services to maximize uptime, availability, and optimization. By minimizing the total cost of ownership, we can help you maintain a leading position in the competition.

>Learn more about our services

Why did you choose ukada

Good product performance

The heat transfer efficiency of spiral plate heat exchanger is 1-3 times that of column tube heat exchanger, and there is no flow dead zone in single channel with equal cross section.

Effective recovery of low temperature heat energy

The fluid in the adjacent channel of spiral plate heat exchanger flows in a pure countercurrent mode, which can obtain the maximum logarithmic average temperature difference, which is conducive to the heat transfer of small temperature difference and make full use of low temperature heat energy.

Not easy to scale

The Tube on the shell adopts tangential structure with relatively low pressure loss. It has the ability of self-cleaning, the medium flows in a spiral type, its allowable flow rate is higher than that of other types of heat exchangers, and dirt is not easy to deposit.

Can be used in combination with multiple

When a single device cannot meet the use requirements, multiple devices can be used in combination, but the combination must comply with the following provisions: Parallel combination, series combination, equipment and channel spacing are the same. Hybrid combination: one channel is connected in parallel and one channel is connected in series.

Longevity of service

There is no welding seam inside and no fixed distance column, which avoids the internal leakage caused by the lack of stuffing during welding. It also avoids the compression deformation of the heat exchange plate caused by the falling of the fixed-distance column due to insufficient support density, thus reducing the service life! A large number of dense bubbling units in the new process improve the stress state of the Spiral Plate, greatly improve the strength of the spiral plate, and increase the service life by more than 30%.

High heat transfer efficiency

The fixed-distance column of the traditional process does not participate in heat exchange, and the heat exchange plate of the spiral plate heat exchanger without fixed-distance column (bubbling) of the new process participates in heat exchange as a whole. Every square meter per degree Celsius (kW/(m(· ℃)) two kinds of heat transfer media fully contact the heat transfer socket to change the flow state of the fluid, the flow direction and flow velocity of the medium change, strengthen the heat transfer effect, the heat transfer efficiency is improved by more than 30%.

Self-cleaning

The structure State of the non-fixed-distance column type (bubbling) spiral plate is more complicated than that of the ordinary spiral plate. The fluid flows in this structure, and there will be no fixed-distance column blocking the fiber. The corrosion resistance is more conducive to the cleaning of the equipment. No residual surface slag and oil slag, maintain the quality of oil products and prolong the service time of oil products. Therefore, the self-cleaning effect of the non-fixed distance column (bubbling) Spiral Plate will be stronger.

Compact structure

The spiral plate is a continuous single-channel structure with no dead angle and higher heat exchange effect. Under the same heat exchange area, the volume is greatly reduced, the bubbling units are dense, and the pressure bearing capacity is strong. The thickness and volume of the spiral heat exchange plate can be reduced, and the volume can be reduced by more than 25%.

Request for information